| TABLE OF CONTENTS | Added | Link |
|---|---|---|
| CONSOLIDATED RENTAL CAR FACILITY | Added | Link |
| AIR CARGO/FREIGHT | Added | Link |
| CHECK-IN DESKS | - | |
| FIXED BASE OPERATORS (FBO) - GA/CHARTERS | Added | Link |
| FLIGHT SCHEDULER | - | |
| GROUND TRANSPORTATION & INTERNAL TRANSPORTATION | - | |
| ONE-WAY PATHS (ENTRANCE/EXITS) | - | |
| PREMIUM AND VIP SERVICES | - | |
| PASSPORT CONTROL/CUSTOMS | - | |
| ROADS | Added | Link |
| RUNWAYS & TAXIWAYS | Added | Link |
| SECURITY CHECKPOINTS | Added | Link |
| SHORT-/LONG-TERM PASSENGER PARKING & STAFF PARKING | - | |
| STANDS | - | |
| AIR TRAFFIC CONTROL (ATC) | - | |
| UTILITIES & AIRPORT SUPPORT | - | |
| ZONING & CONNECTIONS | - |
RUNWAYS | TAXIWAYS
RUNWAYS
EDITABLE FLIGHT PATTERN DIRECTION
There are many times I would like to change the runway landing/take-off pattern directions. To do this you have to delete the runway and re-construct it. It would be a wonderful change in feature to be able to change the landing/take-off flight paths. What does everyone else think?
RUNWAY DESIGNATOR MARKINGS (#’S & L, C, & R)
This is a realistic feature that would make designing and building a real-life airport more fun and enjoyable. There are many times that I use up all the space allowed to build an airport in Airport CEO and I have to turn my design around to where the runways are not even close to the correct Designator Markings. For example, I was making an airport (let’s say Atlanta International) and I couldn’t even build the airport where the runways matched close to the real Atlanta real runway numbers. 27/9 in Airport CEO and 27R/L-9L/R at ATL.
I would love to see a possibility, when clicking on a runway and pulling up the runway menu, to edit the Runway Designator Markings. This would include:
The runway #s (headings)
This includes adding a zero (0) in front of the single digit runways for international runways.
Parallel Runways Markings
L – (left)
R – (right)
C- (center)
This could be done a few different ways. Here are a couple I can think of:
-
- Add all possible numbers and letter to the menu for a drop-down selection option.
-
- Make a text box to type in the runway numbers and heading.
This would also require an edit to the add runway length feature as it says add more runway to the North/South/East/West). Not sure what other things would have to be fixed or adjusted for this one.
ASSIGNED GATES TO RUNWAY
There are so many times at my large airports that aircraft decide to take the longest path to get to the furthest runway. I would be a wonderful feature to have the option to assign stands to runways or runways to gates. This would either be a toggle which like many of the stands and runways already have or a checkbox option.
I know many of people have argued before that it’s not very realistic. To that I say some of us would like that feature as its super annoying when you have multiple aircraft going the long route and clogging up the taxiways by doing so. There should also be an option to select all runways was well for those that want the aircraft to decide with runways they utilize.
DISPLACED THRESHOLDS & BLAST PADS
I would love to see the introduction to displaced thresholds and blast pads. Blast pad mostly for cosmetic effect, but displaced threshold so that aircraft can line up on the runway priort the the start of the runway. They use to be able to do this prior to the introduction to the new runway exit/enter connectors, however, I have not ben able to get my aircraft to enter a departure runway from the very end of it.
If anyone knows how to get your aircraft to do this, please let me know or instead leave your opinion on this subject! Cheers!
TAXIWAYS
HOLD SHORT MARKINGS & POSITION
Taxiway to Runway Hold Short Lines
Taxiway-Taxiway Intersection Hold Short Lines
This was a feature that use to be available before one-way/directional taxiways were introduced. It would be wonderful if Hold short lines were brought back to Airport CEO that would require aircraft to give way to other aircraft on a perpendicular runway without a hold short line, etc… It would also be great to set hold short areas on turns and other locations to keep aircraft from coming so close to the aircraft in-front of them.
Any changes or additional thoughts to hold short lines?